Permit drawings and printing
Site plan, floor plans, sections and elevations to scale, dimensioned your country’s way, ready for the permit.
In the video0:38
How to do it
Place the house on its site in the Site view, and draw a section line (X) where the section should go.
Open Drawings and press “Create application drawings”.
You get a site plan, a plan per floor, section A–A and four elevations on A3, with a title block and a legend – and in Norway an area table.
Choose what each drawing shows: Application, Working or Presentation, or each kind on its own. Click any dimension or label to hide it, and add dimensions, texts and area labels with the tools at the top.
Under “Dimensions” in the same panel, choose how all the drawings write their dimensions: oblique ticks, arrows, open arrows or dots at the ends; mm, cm or m; to 1, 5 or 10 mm; the figures above the line or in it; and how far out the chains stand.
Fill in the title block, then press “Print all sheets” and choose “Save as PDF” and 100 % scale in the print dialog.
Good to know
- Sections and elevations are generated from the model, with levels, room heights, headroom lines, dormers, and eaves and ridge heights above average terrain.
- Hidden things never print. “Show hidden” shows them faint, and “Restore all” brings everything back.
- When the load-bearing structure changes, the set gets a structure sheet per level for the contractor and the engineer.
- Mark a revision when the drawings go out: the title block’s Rev. field shows its letter, a revision table lists the revisions, and revision clouds mark what changed when you send them again. See Revisions.
- Does your architect or engineer work in CAD? “Export DXF” under the sheets gives every plan, section and elevation in one DXF file: at 1:1 in millimetres, on standard layers, dimensioned in your style, with what exists, what is new and what is demolished on layers of their own. “Export plan as DXF” in the project menu gives the plan of the floor you see.
- You can look through the whole set for free. Printing to scale without a watermark needs Pluss.
Questions and answers
What is in the area table?
The rooms and floors in your country’s term, with the sloping-ceiling bands, totals per floor and the built-up area. In Norway it follows NS 3940:2023: BRA-i, BRA-e and BRA-b with their sum BRA, and TBA for open decks and balconies, per floor and per unit.
Do I need the structure sheets?
Only when you change the load-bearing structure. They show the plan with what goes and what is new, the new beams and posts with their supports down to the footing, the order of work and the loads – for the contractor and the structural engineer, who must verify them.
Can the dimensions be in centimetres, or with arrows?
Yes. The dimension style is the project’s: the plan, every sheet, the sections and elevations, the shared file and the DXF follow it. A new project starts the way drawings are usually dimensioned in its country: in Norway in millimetres with oblique ticks, as in Sweden, Denmark, Finland and the Netherlands; in Germany and Austria in metres with the half centimetre raised (3.76⁵); in Poland, Italy and Belgium in centimetres; in Spain and France in metres; in Ireland in millimetres with arrows. Change it under “Dimensions”, or ask the assistant: “dimensions in centimetres with arrows”. Once you have changed it, a button brings your country’s way back.