Load-bearing walls and beams

See what the walls carry and plan opening up a load-bearing wall.

In the video0:32

How to do it

  1. Select a wall. Exterior walls count as load-bearing; mark other walls as load-bearing in the inspector.

  2. The inspector shows what the wall carries: floor decks, roof and snow, and walls and posts above.

  3. Press “Replace with beam”. The wall is demolished on an alterations layer and a sized beam takes its place.

  4. Open the Structure tab for the beam’s size, bearings and posts, and for the order of work from permit to done.

  5. Hide the alterations layer to compare with the house as it is.

Good to know

  • The numbers are a rough estimate to help you understand the consequences. A structural engineer must verify them before any work starts.
  • Changes to the load-bearing structure usually need a permit and qualified professionals – in Norway under pbl §§ 20-1 and 20-3.
  • In Drawings, “Add structure sheet” puts the plan on A3 for the contractor and the engineer: what goes, the new beams and posts with their supports down to the footing, the order of work and the loads.

How can we help?

Ask a question, tell us what went wrong or share an idea. We answer by e-mail, usually within one working day.

What is it about?

What do you want to do, and where are you stuck?

We use it only to answer you.

PNG, JPEG or WebP, up to 5 MB.

How we handle what you send: privacy.