Furniture, mouldings and materials

Furniture, also the exact product from its maker’s 3D model; baseboards, crown mouldings, and the colours of trims, windows and doors.

In the video0:32

How to do it

  1. Open Furniture in the toolbar. The pieces come in nine groups, with pictures: kitchen, dining, bathroom, laundry, bedroom, living room, office, entrance and outdoors – from sofas and beds to water heaters, heat pumps and hot tubs.

  2. Click in the plan to place a piece, and it finds its place by habit: a sofa, a bed or a wardrobe stands with its back to the nearest wall, a dining table or a rug in the middle of the room, a chandelier hangs from the ceiling, and kitchen counters, wardrobes and baths slide into the corner.

  3. Drag a piece to move it, and its round handle to turn it. In the panel, choose its style, size and colours: a bed comes in the usual mattress widths, and Fill the wall stretches a kitchen counter, a wardrobe or shelves between the doors and corners.

  4. For the exact product you have chosen, press “Import a 3D model…” under the groups and pick the maker’s files: a .glb, or a .gltf or .obj with the files that go with it (its .bin or .mtl, and pictures). Or drop them on the plan or in 3D. Check the size and “What it is”, press “Place in the house” and click where it goes.

  5. For a kitchen, pick Kitchen units and build it unit by unit, or Corner kitchen for a quick L in a corner: set its length along each wall, which way it turns and where the sink, the hob and the fridge go, and make it U-shaped to run along a third wall.

  6. Or ask the assistant: “furnish the living room” furnishes a room in one go, and “move the sofa to face the window” or “make the bed 160” changes one piece.

  7. Select a room to set its baseboards and crown mouldings, or set them for the whole house.

Good to know

  • The assistant furnishes a room by its use and its size, as one grey suggestion that one undo takes back. It keeps a passage of about 0.8–0.9 m to the doors and between the pieces, leaves room for the doors to open and the windows clear, puts the bathroom’s fittings along the walls, and says what didn’t fit.
  • The fixed fittings – the kitchen, the bathroom, the laundry, the water heater and the heat pump – are drawn on the application drawings and counted in the material list; loose furniture is left out.
  • Where your country asks for it, the rule check shows whether a wheelchair can turn in front of the WC in the bathroom.
  • A piece from a 3D model is a piece like the others: move, turn, mirror and resize it, one undo step at a time. “What it is” tells the drawings and the assistant what it stands for, so a fridge or a basin from a model is drawn as a fixed fitting. “Use a 3D model…” in any piece’s panel puts the product in its place, and “Replace model…” swaps the file.
  • It shows as itself in 3D and in pictures, as its outline seen from above on the plan and the drawings, as a block named after it in DXF, and under “Chosen products” in the material list. The project keeps each model once, however many times you place it, and the project file carries it.
  • Floors, walls and ceilings have a page of their own: Floors, walls and ceilings. So do the cladding and the roof: Cladding and roof coverings. And kitchens built unit by unit: Kitchens and bathrooms, unit by unit.

Questions and answers

Where do I find the 3D model of a product?

From its maker: many offer one on the product’s page, under downloads or the 3D, CAD or BIM files. House Madness reads GLB, glTF and OBJ; save another format, such as FBX, as one of these in a 3D program first. A .gltf or .obj may come with files of its own (a .bin, an .mtl, pictures): pick them together, as the app fetches nothing from the internet.

Does it keep its real size?

Yes. A glTF is in metres. An OBJ has no unit, so the app reads it from the size (2,100 is millimetres, 210 centimetres), says which, and lets you change it. If the size is still off, type one real dimension, such as the width from the product’s page, and the others follow. “Turn upright” and “Turn the front” right a model lying on its side or facing away.

What if the model is too big, or won’t open?

A heavy model is simplified to 50,000 triangles, so the 3D view stays smooth, and the dialog shows it before and after. Files over 100 MB together, a model of more than 3 million triangles and one that would take more than 20 MB in the project are refused, with the numbers. So is a file that can’t be read, or one that points to files you didn’t pick: the dialog says what is wrong, and “Choose other files…” tries again. The shared file carries up to 4 MB of models, their pictures made smaller where needed; a piece that doesn’t fit shows as its box.

Can the assistant use my model?

Yes. It knows it by its name or by what it is: “put my new sofa against the north wall” moves and turns it, and it can resize it or furnish a room with it. Importing the file is up to you: the assistant shows you the button.

How can we help?

Ask a question, tell us what went wrong or share an idea. We answer by e-mail, usually within one working day.

What is it about?

What do you want to do, and where are you stuck?

We use it only to answer you.

PNG, JPEG or WebP, up to 5 MB.

How we handle what you send: privacy.