The assistantEarly access
Type or say what you want to change, and see the suggestion in grey before you accept it.
In the video0:59
How to do it
Open Assistant at the top and say what you want to change, in plain words: “a window in the living room, facing west”. Type it, or press the sound-wave button and talk.
The assistant draws a suggestion in grey and asks if it got it right.
Correct it the same way: “no, the other corner”.
Press “Accept” to make it part of the drawing, or “Discard”.
Ask where something is or how to do it, wherever you are in the app: “how do I get to the floor plan?”. A cursor shows the way, one step at a time, and you click. Or say “take me there”, and it clicks for you while you watch.
Point while you talk: rest the pointer on a wall, a window, a room or the sofa, on the plan or in 3D, or tap it, and say “a window here”. When your words could mean two things, it rings what it means and asks “This one?”.
Good to know
- It does much more than walls and windows: “here are the drawings of my house – can you draw it up?”, “a dormer on the south side of the loft, 3 metres wide”, “a 3 × 4 m veranda outside the living room, 1 metre above the ground”, “herringbone oak in the living room”, “lower the ground around the house 2.5 metres for a new basement”, “does the loft meet the rules?”, “how many roof tiles do I need?”.
- Load-bearing walls are never removed without a beam or your confirmation, and structural suggestions must be checked by a structural engineer.
- Everything it writes and says is marked as made by AI, as the EU AI Act requires. Anyone can check a text on our AI checker.
- The assistant is in early access. The whole change undoes in one step.
Questions and answers
How do I know a text came from the assistant?
Its answers, the notes it writes on the drawings, the revision texts it writes and the transcripts of live calls carry a record signed by us. Paste the text on the AI checker to see whether the assistant wrote or said it. What you paste is not kept.
Can I talk to it instead of typing?
Yes. Press the sound-wave button and talk, as on the phone: it answers out loud and changes the drawing while you talk, and you can interrupt it. Calls use the account’s assistant minutes.
Can it read photos?
Yes. Add a photo of a ceiling, say which room you took it in, and ask whether there is a beam: it says what it sees and how sure it is. To have the beam measured, press “Mark the beam” on the photo, pick each corner on the room’s plan and tap it in the photo, then two points along the beam, and press Done. The app works out where the beam runs (“north–south, 2.00 m from the west wall, give or take 11 cm”), and the assistant draws it into the plan in grey for you to check.
Can it draw up my old drawings?
Yes. Attach, paste or drop the PDF, or a photo of the plans, in the chat. It tells floor plans from facades, sections and photos, and traces one page per floor onto the levels, on your device, with the scan under the walls; one undo takes it all back. Then it goes through the scale, the room names, the storey height and what didn’t trace with you. In a live call, say “import the drawings I attached”. To read the drawings, it gets images of the pages, sent to Anthropic – never the file itself: see the privacy policy.
What does it get when I point?
One short line in words with your message, such as “the user pointed at the west wall of the living room, 1.2 m from the north corner”. Nothing else about the pointer leaves your device, and what you say always wins over where you point.